Documentation

Start a local installation

Common basics for LINEOPS hubs and coordinators. Available features always depend on the exact model and installed radio modules.

1. Connect

Attach the antenna before powering on, then use Ethernet PoE or the power supply specified for the model.

2. Identify

Find the device on your local network and open its interface from a browser connected to the same network.

3. Configure

Select the radio mode and target service. A coordinator must be controlled by only one service at a time.

4. Test

Pair a nearby device first, then gradually build the mesh with mains-powered routers.

SLZB coordinators

Ethernet or USB connection

Ethernet makes radio placement easier and separates the coordinator from the server. With USB, keep the antenna away from USB 3.0 ports and interference sources.

Understand Ethernet and PoE

SMHUB hubs

Check installed options

Zigbee, Thread, Z-Wave and PoE extensions are not included in every configuration. Check the modules actually supplied before enabling a protocol.

Compare models

Before an update

Back up the configuration, verify the exact model and never disconnect power while firmware is being written.